Remotely Monitoring Light with Tools.Valarm.net

Valarm Tools Cloud Industrial IoT Remote Monitoring Sensor Telemetry Yoctopuce Light Sensor Lux lumens Real Time IIoT ApplicationsThis page is about Industrial IoT light sensors.

These light sensors measure light in lux lumens. The sensors monitor and report values between 0 and 100,000 lux.

Connect your light sensors to your sensor hubs with micro B to micro B USB cables. Then deploy your light sensor wherever you need to monitor light levels.

You can use 4-wire cables with male and female ends to get the light sensor data from the outside to the inside of your monitoring systems.

Remember to line up any arrows that are on your male and female connectors when you’re connecting an external light sensor. If you don’t do this then the data and power cables won’t line up and the sensor won’t work. So be sure to look for the little arrows and line them up as you connect the sensor!

You can put your light sensors in custom enclosure housings designed and built by Valarm, which are ready for rugged outdoor deployments.

Note: This page is a detailed breakdown of 1 critical component in solar-powered, Valarm remote monitoring units. Click here to go back to the home page of “What’s In A Valarm Industrial IoT Box??” and figure out any other parts and pieces your organization will deploy for monitoring Industrial IoT sensors.

 

Questions?

Please don’t hesitate to reach out to us at Info@Valarm.net if you have any questions.Whether you need to monitor water, tanks, flood warning systems, or anything else, we’ve been doing this since 2011 and we’re happy to assist you so you can save your time and your money. We’re here and ready to help you, your teams, and your organization deploy your most effective monitoring systems.